| Description |
 Generating installations are intended for formation of powerful electromagnetic fluctuations in a range of frequencies from 12 up to 150 кgz.The Russian institute of a powerful radiostructure Is engaged designing, manufacturing, installation on objects of the customer and delivery in operation "on a turn-key basis" devices, the generating and converting power installations adequate to the following characteristics:
The basic characteristics of generating installation:
Capacity - 80 kw
Range of frequencies - 15 up to 150 кГц
Step of a grid of frequencies - On demand of the customer
Relative instability of frequency - 1х10-5 - 1х10-9
Efficiency - Not less than 0,75-0,8
cos φ - Not less than 0,9
The factor of harmonics of a target sine wave signal - is not higher than 2 %
Power supplies A network a pressure - 380/220 In ± 15 % with frequency (50 ± 0,2) Hz
Time of a time between failures - Not less than 5000 ч
Conditions of operation - -40...+50 ° With
Relative humidity - 98 %
Cooling - Air
Design - «Euromechanics 19»
Variants of execution - Stationary and mobile
Dimensions of generating installation, mm-800х1200х800
Weight of generating installation, kg - 280
Service life of generating installation - 20 years at an operating time 120000 ч
Use of generating installation:
- Transfer of the information on the big distances in modes of frequency, phase, peak modulation and multiitem frequency telegraphy
- Signaling uniform time
- Transformation of frequencies at the big levels of capacities
- Creation of special signals for geophysical researches and sounding of the Earth's crust
- Formation of special electromagnetic fields for the medical purposes
- Creation of electromagnetic liaison channels for controlled drilling oil-extracting chinks
- Creation of installations of induction heating for training metal, drying of paint and varnish coverings and other purposes
- Creation of complexes of the equipment for carrying out of salvage operations in mines (an emergency communication with the personnel which has got in a blockage)
- Creation installations for clearing constructions, sanitation of premises, materials, etc.
- Optimum regulation of productivity of fans, liquid pumps, etc.
For the order of production submitted on the given page take advantage of the essential elements of the company submitted in section " the Contact information " in the beginning of page.
For electronic communication take advantage of a key " To send inquiry in the company " which is located in the beginning of page.
|
|
|
|
